7/16 UNF BANJO BOLT KIT FITTINGS WITH 2 X WASHERS –
38,70€
7/16 UNF Banjo Bolt Kit
Manufactured from 303 Stainless Steel
Product Information:
Fitting 1: 7/16 UNF Male Banjo
Fitting 2: 7/16 UNF Male Banjo Bolt
Extras: 2x Copper Washers
Available on backorder
Este conjunto é composto por 3 tintas diferentes – Verde, Laranja e Vermelho são aplicadas na borda externa do disco de travão e dão uma boa indicação das temperaturas máximas que o disco atingiu durante o uso.
Três tintas diferentes são usadas: –
Tinta Verde: Torna-se Branca a 430°C.
Tinta laranja: torna-se amarelo a 560°C.
Tinta vermelha: Torna-se branca a 610°C.
Stainless Steel Braided Reservoir Feed Pipe
Product Information:
Length: 930mm
Fitting 1: 7/16 UNF Female
Fitting 2: 7/16 UNF Female
Adaptor 1: 7/16 UNF Male – Male Adaptor
Liner: PTFE
Operating Temperature: -60 deg C to + 260 deg C
Our specially selected range of products that work in unison with all of our obp Motorsport core hardware. Whether you are looking for master cylinders, bias adjusters or replacement parts. obp Motorsport has you covered.
Product Information:
8.35mm U Gap Clevis
Thread: 5/16” UNF
Stainless Steel Braided Reservoir Feed Pipe
Product Information:
Length: 530mm
Fitting 1: 7/16 UNF Female
Fitting 2: 7/16 UNF Female
Adaptor 1: OBPBAN01 7/16 Male Banjo Bolt Kit
Liner: PTFE
Operating Temperature: -60 deg C to + 260 deg C
7/16”-24 UNF Bias Bar with Tube for obp Motorsport Pedal Systems
Our specially selected range of products that work in unison with all of our obp Motorsport core hardware. Whether you are looking for master cylinders, bias adjusters or replacement parts. obp Motorsport has you covered.
Product Information:
Manufactured from T6061 Aluminium
Anodized Finish
Thread: 7/16” UNF
1/8” NPT Inline Brake Pressure Switch
Our specially selected range of products that work in unison with all of our obp Motorsport core hardware. Whether you are looking for master cylinders, bias adjusters or replacement parts. obp Motorsport has you covered.
Product Information:
Thread: 1/8” NPT
Pro-Race Hydraulic to Cable Clutch Converter Mechanism for OBP0002PR and OBP0002PRT
Our specially selected range of products that work in unison with all of our obp Motorsport core hardware. Whether you are looking for master cylinders, bias adjusters or replacement parts. obp Motorsport has you covered.
Product Information:
Designed for OBP0002PR and OBP0002PRT Pro-Race V2 Pedal Systems
1/8” BSP Female Outlet Line Lock
Our specially selected range of products that work in unison with all of our obp Motorsport core hardware. Whether you are looking for master cylinders, bias adjusters or replacement parts. obp Motorsport has you covered.
Product Information:
Anodized Finish
Outlet Threads: 1/8” BSP Female
Controlo de Temperatura!
De 116°C a 154°C
Vendido em packs de 10.
VHT Caliper Paint
has been specifically designed for the custom detailing of brake components. It is heat resistant to 482°C intermittent and will not chip, crack, fade or rust even under extremes of operation or road and weather conditions. It is easy to apply, dries quickly and is remarkably resistant. Careful preparation is essential.
Dries tho: roughly overnight.
Our specially selected range of products that work in unison with all of our obp Motorsport core hardware. Whether you are looking for master cylinders, bias adjusters or replacement parts. obp Motorsport has you covered.
Product Information:
5.4mm U Gap Clevis
Thread: M6
Controlo de Temperatura!
De 71°C a 110°C
Vendido em packs de 10.