REDLINE OIL 30305 Racing ATF (Type F) – 3,8L
84,00€
Superior consistency and wear protection for Bracket and Heads-Up drag racing transmissions like Powerglide and Turbo 400
Popular with turbo and blown doorslammers like NMRA, NMCA, ORSCA and PSCA — replaces hydraulic oils and other non-ATFs used to escape heat issues
Low viscosity offers less frictional drag for quicker ETs and more MPH
Dissipates heat for longer trans life, better clutch, gear, and seal life
Compatible with petroleum ATFs and other brands synthetic ATF
Extreme-pressure protection provides much better film-strength
Available on backorder
Contains extreme pressure additives like our 75W140 GL-5 oil, but lacks friction modifiers to balance slipperiness
Popular for historic and vintage transmissions, like Mid-1930s to early-1950s synchro-equipped gearboxes in cars and trucks
Helps with noisy or rough shifting in troubled A-833 Dodge/Plymouth 4-speed transmissions from 1964 to 1969
Option for noisy transmissions when mixed with 75W90NS or MT-90 to bring viscosity level up
Also used in clutch-type limited slip differentials in racing for maximum lock up-some users add Limited Slip Friction Modifier in small doses to customize slippage
Non corrosive formula, safe for use with all synchro materials
Popular for cars and light trucks like Ford Mustang and F-150, Toyota Tundra and Sequoia, Jeep Cherokee and Dodge Ram
Contains additional friction modifiers for suitability with clutch-type limited slip differentials – for most LSDs, no additional friction modifiers are required
This product is not designed for use in most manual transmissions or transaxles, since the extreme slipperiness may cause synchronizer mesh issues that lead to shifting problems
Recommended for API GL-5, GL-6, MT-1, MIL-L-2105E and SAE J2360
Low-cost biodegradable product
Designed for engines which require a low-ash oil
Not for use where TC-W oils are recommended
Up to 3% more power and significantly better bearing life
Additives to prevent ring sticking, scuff protection, cleaner pistons and exhaust ports
Recommended for Nissan 350Z and 370Z (also most Maxima, Altima & Sentra), Mitsubishi Evolution, Hyundai, Kia and Quaife synchro manual trans applications
Many NV4500 truck transmission applications like Chevy Silverado and Dodge Ram, for Chrysler spec MS-9070
Safe for brass synchros, as it lacks the reactive sulfurs found in most GL-5 oils that cause damage
Offers quicker shifts, a perfect synchronizer coefficient of friction
Eliminates notchy shifting, even when cold
High performance gear protection and longer synchro life
Recommended for GL-1, GL-3 and GL-4 applications as well as where most special synchromesh fluids are specified
Satisfies the gear oil viscosity requirements of 85W, 75W85 and motor oil viscosities of SAE 30 and 5W30
Superior consistency and wear protection for Bracket and Heads-Up drag racing transmissions like Powerglide and Turbo 400
Popular with turbo and blown doorslammers like NMRA, NMCA, ORSCA and PSCA — replaces hydraulic oils and other non-ATFs used to escape heat issues
Low viscosity offers less frictional drag for quicker ETs and more MPH
Dissipates heat for longer trans life, better clutch, gear, and seal life
Compatible with petroleum ATFs and other brands synthetic ATF
Extreme-pressure protection provides much better film-strength
Contains extreme pressure additives like our 75W140 GL-5 oil, but lacks friction modifiers to balance slipperiness
Popular for historic and vintage transmissions, like Mid-1930s to early-1950s synchro-equipped gearboxes in cars and trucks
Helps with noisy or rough shifting in troubled A-833 Dodge/Plymouth 4-speed transmissions from 1964 to 1969
Option for noisy transmissions when mixed with 75W90NS or MT-90 to bring viscosity level up
Also used in clutch-type limited slip differentials in racing for maximum lock up-some users add Limited Slip Friction Modifier in small doses to customize slippage
Non corrosive formula, safe for use with all synchro materials
For heavily-loaded vehicles, allowing operation at up to 70°F higher while maintaining thicker viscosity than traditional ATFs
Use where Dexron III®, Dexron II®, Mercon® or GL-4 gear oil are recommended
Dramatically less evaporation, less varnish of valves and clutches in extreme conditions
Film thickness greater than an SAE 75W250, yet low fluid friction like 75W90
For heavily-loaded racing differentials and transmissions, problem gearboxes
Most popular ShockProof product, many racing and specialty applications
Many performance racing applications like Sprint, Midget, Dirt Late Model and Quick Change Differentials, Detroit Lockers and spools, NHRA Top Fuel and Funny Car rear ends
Not recommended for most synchro applications due to the product’s extreme slipperiness
Satisfies Chrysler ATF+, +2, +3 (Type 7176) and ATF+4 (Type 9602) requirements
Provides 30% greater operating viscosity and 1/3 the evaporation of Chrysler-style petroleum ATFs
Our lowest viscosity, most shear-stable ATF for consistent operation, designed to satisfy Dexron-VI®, Mercon®SP, Mercon®LV, Honda DW-1, Toyota WS, Mercedes Benz NAG-2, ZF-LG 6, 6+ and 8 fluids, for use in automatic and manual transmissions
Also satisfies API 70W/75W and GL-4 gear oil requirements
